Error Codes
E1 = high pressure compressor protection
E2 = protection of the indoor unit freezing.
E3 = compressor protection against low pressure
E4 = protection against high supply temperature.
E5 = protection against overloads the compressor.
E6 = malfunction in communication.
E7 = contradiction of operating modes.
F0 = malfunction of the temperature sensor.
F1 = malfunction of the temperature sensor on the battery input of the indoor unit.
F2 = malfunction of the temperature sensor inside the battery indoor unit.
F3 = malfunction of the temperature sensor at the outlet of the battery of the indoor unit.
F4 = malfunction outdoor environmental sensor.
F5 = malfunction of the temperature sensor in the battery entered the outdoor unit.
F6 = failure in the fan speed control. The connections between the electric motor and the control board must be checked.
F7 = fault return sensor. The connections between the temperature sensor and the control board must be checked.
F8 = sensor failure of internal coil. The connections between the temperature sensor and the control board must be checked.
F9 = sensor failure external coil. The connections between the temperature sensor and the control board must be checked.
FA = malfunction of the sensor 1 of the oil temperature (nominal frequency).
FB = malfunction of the sensor 2 of the oil temperature (digital).
FC = malfunction of the high pressure sensor.
FD = malfunction of the low-pressure sensor.
Error Codes air conditioner Split Electrolux
Analysis codes reverse
F1 = open temperature sensor / shorted.
F2 = temperature sensor evaporator open / short
H6 = motorized fan of the indoor unit does not work.
C5 = malfunction jumper cover protection.
U8 = malfunction of the motorized fan of the indoor unit through the zero-crossing system.
E5 = overload protection.
E6 = communication error reverse.
