To install your split air conditioner, you will need
• A drill with a one and a half inch drill;
• A platform to level the condensing unit support;
• Hammer;
• Pliers;
• PVC pipe with an inch in diameter
• PVC glue
•Allen key
• Spanners
• Manifold
•Pump vacuum
• Flanged
• Pipe cutter
• Tube bender
• Thermal insulation spongy
• Insulation tape for spongy
To start installing your split air conditioner, you will need to check the leveling. To do this, place the pallet on the floor and position the condensing unit on the pallet.
Use the drill to open a hole in the wall and insert the cooling line through the hole.
Drill a hole in the wall where you intend to install your split air conditioner and pass the condenser cooling line to that room. Then connect the PVC pipe to the location of the air conditioner and don't forget to pull the electrical wires between the two rooms.
Screw the metal bracelet to the wall. Don't forget to consult the manual to check the height recommended by the manufacturer. Then, place the device on the bracelet.
Now comes the finishing, make the final connections including the electrical installations. Finish by placing the cover of your split air conditioner.
