• Install the cabinet on the counter or place specially built for its placement, observing the distance of 15 to 20 cm on the right and left sides in relation to any object or wall, in order to guarantee the free circulation of air, around the device .
• Clean the evaporator tank and wash the tank.
• Place the rotor (or rotors) of the circulation pump in the pump hole with the flat side facing down.
• Fit the reservoir to the evaporator tank.
• Put water in the reservoir in an amount that allows testing the rubber ring seal.
• Turn on the compressor on the switch and the circulation pump and check that the appliance is operating normally.
• Turn off the compressor and the circulation pump and empty the tank.
• Put the juice in the reservoir. Regardless of whether they are natural or artificial, it is recommended that the juices be strained through a mesh sieve [ma before being placed in the compartment to prevent lint from the juices from catching the circulation pump.
• Reconnect the compressor and the circulation pump.
• Use a pocket thermometer to check the temperature of the juice, which must be between 8 ° C and 10 ° C.
• Adjust the thermostat, if the juice temperature does not reach the indicated values.
