1- With the cooler with closed doors, turn off the outlet and wait 40 seconds;
2 Plug in and wait about 15 seconds;
3. Press the 5 times haltingly panel temperature knob. After the fifth time, wait 2 seconds.
4. Press the button, the fan should turn;
5. Press the button, the fan is off;
6. Press the button, the compressor should call;
7 Press the button, the compressor is off
8. Press the button, the resistance should trigger;
Using ammeter, check the chain on white wire 10-way connector (pin 01). 127 V = 1.5 A and 0.9 A 220V =
9. Press the button, the resistance should switch off;
10- Pressing again, the module leaves the routine tests returning to normal operation.
