Install the drain pipe according to the Installation Manual, so that the water is completely drained and insulate the pipes so as not to form condensation.
Incorrect installation of the tube may result in internal water leakage on furniture, etc.
• Insulate the drain pipes completely.
• Isolate the connection to the indoor unit.
Incomplete insulation may result in the formation of condensation.
• Make sure that the drain pipe is tilted down by a ratio of 1/100 or more, and do not direct the drain pipe to another pipe and do not create a siphon.
All of this can cause strange noises.
• Do not apply undue force to the drain pipe connection.
• Do not create any of the drainage situations not recommended by the manufacturer.
• When extending the drain hose, make the connection according to the manufacturer's guidance
• Since the drain is a gravity drain, make sure that the piping outside the unit has a downward slope.
• When the pipeline installation is complete, pour water into the drain receptacle and see if the water is completely drained.