Nice weather
Adjust the temperature so that the environment is not too cold or too hot, which will cause discomfort.
Usually a difference of 7 ° C between the ambient and the outside air is adequate.
Use curtains
Insulation is usually the main source of heat in environments
Clean the filters regularly
When the filters are dirty, the capacity of the equipment decreases and the
energy consumption increases. Clean the filters every two weeks.
Excess heat sources
If there is an excess of heat sources (many people or equipment), the device may not be able to reach the desired temperature.
Doors and windows must remain closed
During cooling, avoid unnecessary opening of doors and windows. This improves the performance of the device.
Air distribution
Try to direct the air to reach the largest possible area of the environment.
Blackout
Due to the device's protection circuit, after a power failure the
same must be rewired.
Electric discharge
When lightning strikes, the equipment must be turned off and the plug removed.
